Rockwell Automation 1336S Plus FRN 1.xx-5.xx - Manual (Page 15)

2–5 Installation/Wiring
!
ATTENTION: The 1336 PLUS does not provide
input power short circuit fusing. Specifications for the
recommended fuse size and type to provide drive input
power protection against short circuits are provided.
Branch circuit breakers or disconnect switches cannot
provide this level of protection for drive components.
Table 2.A
Maximum Recommended AC Input Line Fuse Ratings (fuses are user supplied)
European
Installations North American
Installations Drive Catalog
Number
kW (HP) Rating
200-240V
Rating 380-480V
Rating 500-600V
Rating
The recommended fuse is Class gG, UL requirements specify
C CC 1
1336S- _ _ F05, 7 0.37-0.56 (0.5-0.75) 6A 2 3A 2 – The recommended fuse is Class gG,
general industrial applications and
motor circuit protection UL requirements s ecify
that UL Class CC, T or J
1
fuses must be used for all
1336S- _ _ F10 0.75 (1) 10A 2 6A 2 6A 2
motor circuit protection.
BS88 (B iti h St d d) P t 1 & 2 *
fuses must be used for all
drives in this section*.
1336S- _ _ F15 1.2 (1.5) 15A 2 6A 2 –
BS88 (British Standard) Parts 1 & 2 *,
EN60269-1 Parts 1 & 2 type gG or
drives in this section*.
* Typical designations
1336S- _ _ F20 1.5 (2) 15A 2 10A 2 10A 2
EN60269-1, Parts 1 & 2, type gG or
equivalent should be used for these * Typical designations
include:
1336S- _ _ F30 2.2 (3) 25A 2 15A 2 15A 2
equivalent should be used for these
drives. Fuses that meet BS88 Parts 1
& 2
t bl f F A F
include:
Type CC: KTK FNQ-R
1336S- _ _ F50 3.7 (5) 40A 2 20A 2 20A 2
& 2 are acceptable for Frames A - F.
Type CC: KTK, FNQ-R
Type J:
JKS, LPJ 1336S- _ _ F75 5.5 (7.5) – 20A 2 –
* Typical designations include, but
t b li it d t th f ll i
Ty e J: JKS, LPJ
Type T: JJS, JJN 1336S- _ _ F100 7.5 (10) – 30A 2 – y g
may not be limited to the following:
y
1336S- _ _ 007 5.5 (7.5) 40A 20A 15A
Parts 1 & 2: AC, AD, BC, BD, CD,
DD ED EFS EF FF FG GF GG
1336S- _ _ 010 7.5 (10) 50A 30A 20A
DD, ED, EFS, EF, FF, FG, GF, GG,
GH.
1336S- _ _ 015 11 (15) 70A 35A 25A
GH.
1336S- _ _ 020 15 (20) 100A 45A 35A
1336S- _ _ 025 18.5 (25) 100A 60A 40A
1336S- _ _ 030 22 (30) 125A 70A 50A
1336S- _ _ 040 30 (40) 150A 80A 60A
1336S- _ _ 050 37 (50) 200A 100A 80A
1336S- _ _ X060 45 (60) – 100A –
1336S- _ _ 060 45 (60) 250A 125A 90A
1336S- _ _ 075 56 (75) 300A 150A 110A
1336S- _ _ 100 75 (100) 400A 200A 150A
1336S- _ _ 125 93 (125) 450A 250A 175A
1336S- _ _ X150 112 (150) – 250A –
1336S- _ _ 150 112 (150) – 300A 225A
1336S- _ _ 200 149 (200) – 400A 350A
1336S- _ _ 250 187 (250) – 450A 400A
1336S- _ _ X300 224 (300) – – 400A
The recommended fuse is Class gG, Bussmann FWP/Gould
S
Q QS
1336S- _ P250 3 187 (250) – 450A 3 – The recommended fuse is Class gG,
general industrial applications and
motor circuit protection Bussmann FWP/Gould
Shawmut A-70Q or QS
semiconductor type fuses
1336S- _ _ X250 187 (250) – 450A –
motor circuit protection.
BS88 (British Standard) Part 4
semiconductor type fuses
must be used for all drives
1336S- _ _ 300 224 (300) – 450A 400A
BS88 (British Standard) Part 4,
EN60269-1, Part 4 *, type gG semi-
must be used for all drives
in this section.
1336S- _ P300 3 224 (300) – 500A 3 –
EN60269-1, Part 4 *, type gG semi-
conductor fuses or equivalent should
in this section.
1336S- _ _ 350 261 (350) – 500A 450A conductor fuses or equivalent should
be used for these drives. G Frame
drives require semiconductor fuses
1336S- _ P350 3 261 (350) – 600A 3 –
drives require semiconductor fuses
and should be fused with Part 4 fuses
1336S- _ _ 400 298 (400) – 600A 500A
and should be fused with Part 4 fuses.
* Typical designations include but
1336S- _ P400 3 298 (400) – 600A 3 –
* Typical designations include, but
may not be limited to the following:
1336S- _ _ 450 336 (450) – 800A 600A
may not be limited to the following:
Part 4: CT ET FE EET FEE RFEE
1336S- _ P450 3 336 (450) – 700A 3 –
Part 4: CT, ET, FE, EET, FEE, RFEE,
FM, FMM.
1336S- _ _ 500 373 (500) – 800A 800A
FM, FMM.
1336S- _ _ 600 448 (600) – 900A 800A
1 Both fast acting and slow blow are acceptable. 2 Dual element-time delay fuses are required. 3 Fuses are supplied with F Frame drives.
Input Fusing