SATEC PM180 Operation Manual - Manual (Page 62)

‎Chapter 7 Programming the PM180 Changing Port Settings
60 PM180 Substation Automation Unit
The following table lists available options. Refer to your eXpertPower service
provider for the correct eXpertPower settings.
Parameter Options Default Description
XPW Server IP Address 207.232.60.1
8 The IP address of the
eXpertPower server
XPW Server Port 0-65535 5001 The TCP service port of
the eXpertPower server
XPW Client Enabled NO, YES NO Enables operations of the
eXpertPower client
Time to Next Session, min 1-99999 The time remaining to the
next connection session
NOTES:
1. If you do not use the eXpertPower TM
service, do not enable the eXpertPower
client in your device.
2. Do not change the connection period
setting. The eXpertPower server
updates it automatically.