Setting up the local network, Configuring expertpower client – SATEC PM180 Operation Manual User Manual
Page 61
Chapter 7 Programming the PM180
Changing Port Settings
PM180 Substation Automation Unit
59
Setting Up the Local Network
To enter the setup dialog, select the device site from the list box on the PAS toolbar,
select Communications Setup from the Meter Setup menu, and then click on the
Network Setup tab.
To change the Ethernet settings in your device, select desired parameters, and then
click Send. For more information, see
Configuring eXpertPower Client
The PM180 has an embedded eXpertPower
TM
client that provides communications
with the eXpertPower
TM
server
– the SATEC proprietary Internet services.
Connections to the eXpertPower
TM
server are handled on a periodic basis.
To enter the Setup dialog, select the site from the list box on the PAS toolbar, select
Communication Setup from the Meter Setup menu, and then click on the
ExpertPower Client Setup tab.