SATEC SA300 ezPAC Operation Manual - Manual (Page 156)

Chapter 15 COMTRADE and PQDIF Converters Automatic Converting
156 SA300 Substation Automation Unit
PQDIF file names contain a site name followed by a timestamp of the first event
recorded to the file, and may look like 12KVSUB_20040928T133038.pqd.
Automatic Converting
PAS allows you to automatically convert waveform and data logs into COMTRADE or
PQDIF format at the time you upload data from your devices via the Upload
Scheduler.
To automatically convert your waveform or data log tables into COMTRADE or
PQDIF format:
1. Open the Upload Scheduler.
2. Highlight a desired device site with the left mouse button, and then
click on the Export button.
3. Check the Enabled box for a data log or a waveform log table you
want to automatically convert at the upload time.
4. Highlight the Record to… row for the selected table and click on the
Browse button.
5. Select a folder where you want to store converted files, type in the
converted file’s name, select a desired output file format, and then
click on Save.
6. Repeat the same for all tables you wish to be converted.
7. Click
OK.