SATEC SA300 ezPAC Operation Manual - Manual (Page 141)

Chapter 14 Viewing Log Files Viewing EN50160 Statistics Reports
SA300 Substation Automation Unit 141
data, uncheck the voltage characteristics’ tables you do not want to be reported, and
then click Open.
An example of the EN50160 compliance report is shown in the following picture.
The standard compliance statistics is reported within the selected time range on a
daily, weekly or yearly basis depending on the observation periods stated in the
EN50160 for voltage characteristics. If the time range includes a number of the
observation intervals, each interval’s statistics is given in a separate row. For power
frequency, both weekly and yearly compliance statistics are provided.