Lenze Global Drive PLC Developer Studio - Manual (Page 51)

Drive PLC
System blocks
2.13 PWRUP_PowerUpControl (node number 171)
2−37
L
DrivePLC DE 6.0
2.13.1 Outputs_PWRUP
System variables
Variable Data type Signal type Address
Display
code
Display
format
Notes
PWRUP_bWaitFor24V
_b
Bool binary %QX171.1.0 − −
TRUE: After initialisation, wait and
see if a sufficient supply voltage is
applied again (>17.5 V)
PWRUP_wMaxDelayTi
meFor24V
WORD − %QW171.0 − −
Maximum waiting time in ms; U15
TRIP is activated unless a supply
voltage of at least 17.5 V is
applied after this time.