Lenze Global Drive PLC Developer Studio - Manual (Page 115)

Drive PLC
Appendix
8.6 Code table
8−35
L
DrivePLC DE 6.0
Code Info Possible settings LCD Code Info
Selection Lenze
LCD
C2461 Load IN/OUT g FIF−CAN: Bus load
·
Trouble−free operation demands that the total bus load
(all connected devices) does not exceed 80 %.
0 {1 %} 100
1 all sent
2 all received
3 Sent to FIF−CAN1_OUT
4 Sent to FIF−CAN2_OUT
5 Sent to FIF−CAN3_OUT
6 Sent to parameter data channel 1
7 Sent to parameter data channel 2
8 Received by FIF−CAN1_IN
9 Received by FIF−CAN2_IN
10 Received by FIF−CAN3_IN
11 Received by parameter data channel 1
12 Received by parameter data channel 2
C2466 Sync response 1 FIF−CAN: Sync response
0 No response
1 Response to sync
No response
PLC responds to a sync telegram by sending the
FIF−CAN1_OUT object.
C2467 Sync Rx Id 128 FIF−CAN: Sync Rx identifier
·
Receive identifier of the Sync telegram.
1 {1} 256
C2468 Sync Tx Id 128 FIF−CAN: Sync Tx identifier
·
Send identifier of the sync telegram.
1 {1} 256
C2469 Sync Tx time 0 FIF−CAN: Sync send telegram cycle
·
A sync telegram with the identifier of C2468 is sent
with the set cycle time.
0 {1} 65000
0 = off
C2470 ParWriteChan. 0 FIF−CAN object for L_ParRead and L_ParWrite
0 FIF−PDO channel (FIF_CAN1_IO ... FIF_CAN3_IO)
1 FIF−SDO2 channel
C2481 MONIT CE11 3 FIF−CAN: Monitoring configuration
FIF−CAN1_IN communication error (CE11)
0 TRIP
2 Warning
3 Off
C2482 MONIT CE12 3 FIF−CAN: Monitoring configuration
FIF−CAN2_IN communication error (CE12)
0 TRIP
2 Warning
3 Off
C2483 MONIT CE13 3 FIF−CAN: Monitoring configuration
FIF−CAN3_IN communication error (CE13)
0 TRIP
2 Warning
3 Off
C2484 MONIT CE14 3 FIF−CAN: Monitoring configuration
BusOffState" (CE14)
0 TRIP
2 Warning
3 Off