Seiwa SW701i SW701e - Manual (Page 61)

63 User Manual
Cable Wiring pages
This menu allows you select the Cable Wiring page preferred:
[MENU] + "Advanced Options" + [ENTER] + "Input/Output"+ [ENTER] +
"Cable Wiring" + [ENTER]
Power I/O Cable Wiring 1 : Shows a window containing the Power I/O cable wiring.
Quick Disconnect Cable Wiring 3 : Shows a window containing the quick disconnect bracket cable wiring.
GPS Cable Wiring 1 : Shows a window containing the GPS cable wiring.
AUX In I/O Cable Wiring 2 : Shows a window containing the AUX IN I/O cable wiring.
I/O Port 1-2 4 : Shows a window containing the Port 1 and 2 cable wiring.
I/O Port 4-5 4 : Shows a window containing the Port 4 and 5 cable wiring.
I/O Port 3 - GPS 4 : Shows a window containing the Port 3 - GPS cable wiring.
NOTE 1 A
VAILABLE
F
OR
SW1101/SEAWAVE 3 /EXPLORER 3 .
NOTE 2 A
VAILABLE
F
OR
SW701e/SW701i/SW701ce/SW701ci/SW1101 .
NOTE 3 A
VAILABLE
F
OR
SW501e/SW501i/SW501ce/SW501ci/SW701e/SW701i/
SW701ce/SW701ci/SEAWAVE 3 /EXPLORER 3 .
NOTE 4 A
VAILABLE
F
OR
MARLIN.
Send/Receive Routes & Marks
Sets the desired port used for transferring User Points and Routes functions:
[MENU] + "Advanced Options" + [ENTER] + "Input/Output" + [ENTER] +
"Send/Rec Rts & Mrks" + [ENTER] + "Port n" + [ENTER]
Where:
n = 1/2/3 for SW501e/SW501i
n = 1/3 for SW501ce/SW501ci
n = 1/2/3/4/5 for SW701e/SW701i/SW1101/SEAWAVE 3 /MARLIN/
EXPLORER 3
n = 1/3/4/5 for SW701ce/SW701ci
3.6.2 C-Link menu
Select the Primary or Secondary Station (see the dedicated Chapter):
[MENU] + "Advanced Options" + [ENTER] + "C-Link" + [ENTER] + "Second-
ary Station/Primary Station" + [ENTER]
3.6.3 Fix & Compass menu
To handle the functions related to navigation and to set the reference heading
information such as bearing angles (True or Magnetic), the Magnetic Variation
source and to enter Compass Calibration values.
[MENU] + "Advanced Options" + [ENTER] + "Fix & Compass" + [ENTER]
Fix Correction : Turns On/Off the Correction from the positioning system. If the new Correction is calculated,
but the Correction is not enabled, the ship's position is not changed.
Compute Correction : Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position
and selecting this option, the error is calculated and internally memorized for appropriate
correction, but not applied.
Correction Offset : Manual correction of fix position.
Static Navigation 1 : Sets up a threshold for the speed. When the speed received from the positioning device is
under that threshold, the chart plotter displays zero speed.
Position Filter : Turns On/Off the Position Filter. In case of a jittering fix this option makes the ship's position
more stable and the track smoother.
Speed Filter : Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship, to optimize it.
Bearing : Selects either degrees magnetic, Auto Mag, or True. If magnetic readings are selected the
variation is computed automatically for every zone as soon as the chart is displayed.
Magnetic Variation : It is possible to calculate the Magnetic Variation in an Automatic or manual mode, by inserting
the step for calculation of Magnetic Variation.
Calibrate Compass : The variation table is used to match magnetic value readout on the chart plotter comparable