Inserting waypoint, Reversing route, Selecting route report page – Seiwa SW701i SW701e User Manual
Page 33: Sending route, Receiving route, Safe route checking

35
User Manual
Inserting Waypoint
To insert a new Waypoint between two existing ones:
Place the cursor on the desired Route leg + [Insert]
1
+ move the cursor to
the new position + [ENTER]
1
NOTE
1
F
OR
SEAWAVE
3
, press [1, Insert] and [1, Accept].
The new Waypoint is placed.
To add a new Waypoint to the last Waypoint of the Route:
Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]
MARLIN:
Place the cursor + [ROUTE]
Reversing Route
To generate a new route reversing an existing one.
If in Route Data Report page:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Reverse]
1
NOTE
1
F
OR
SEAWAVE
3
, press [3, Reverse].
SW1101:
[DATA] + "Route" + [ENTER] + "Report" + [ENTER] + [Reverse]
The Route is then followed in reverse order, with Waypoints renumbered accord-
ingly. If the destination is placed on the Route, that Route cannot be reversed.
Selecting Route Report page
To give information on Waypoints belonging to the selected Route:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER]
SW1101:
[DATA] + "Route" + [ENTER] + "Report" + [ENTER]
In this page it is possible to modify the Speed and Fuel consumption values:
[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Speed]
1
/[Fuel]
1
+
use the cursor to insert values + [ENTER]
NOTE
1
F
OR
SEAWAVE
3
, press [1, Fuel]/[2, Speed].
SW1101:
[DATA] + "Route" + [ENTER] + "Report" + [ENTER] + [Speed]/[Fuel] + use
the cursor to insert values + [ENTER]
Sending Route
To transmit the Active Route information onto the NMEA output port.
[MENU] + "Route" + [ENTER] + "Send" + [ENTER]
SW1101:
[DATA] + "Route" + [ENTER] + "Send" + [ENTER]
The NMEA WPL & RTE messages are sent to the output port.
Receiving Route
To save Route information received from the NMEA input port.
[MENU] + "Route" + [ENTER] + "Receive" + [ENTER]
SW1101:
[DATA] + "Route" + [ENTER] + "Receive" + [ENTER]
The received route is saved on the Active route, overwriting it. The NMEA WPL &
RTE messages are sent to the input port.
Safe Route Checking
This function checks the presence of particular cartographic objects (see the list