Selecting track color, Displaying track, Activating/deactivating track recording – Seiwa SW701i SW701e User Manual
Page 36
38
User Manual
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Step Unit" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Step Unit" + [ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Config" + [ENTER] + "Step Unit" + [ENTER]
You can select the Track step Time [1, 5, 10, 30 sec, 1 min] or distance [0.01,
0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0] Nm. Setting a short time/distance interval
between Track points is best suited to navigate within a close or complex environ-
ment, a greater time/distance interval is best suited to a long voyage.
To select the interval at which the Track points are placed.
If you have selected Distance:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Distance Step" +
[ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Distance Step" +
[ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Config" + [ENTER] + "Distance Step" + [ENTER]
If you have selected Time:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Time Step" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Time Step" + [ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Config" + [ENTER] + "Time Step" + [ENTER]
Selecting Track Color
You can select 8 different line colors that you choose for the Track:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Color" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Color" + [ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Config" + [ENTER] + "Color" + [ENTER]
The same Track can be saved with any color.
Displaying Track
To enable or disable the Track displaying on the map screen:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Display Mode" +
[ENTER] + "Visible"/"Hidden" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Display Mode" +
[ENTER] + "Visible"/"Hidden" + [ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Config" + [ENTER] + "Display Mode" + [ENTER] + "Visible"/
"Hidden" + [ENTER]
Activating/Deactivating Track Recording
To activate or deactivate the Tracking of the vessel while the vessel is moving:
[MENU] + "Track" + [ENTER] + "Activate"/"Deactivate" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Activate"/"Deactivate" + [ENTER]
MARLIN/SEAWAVE
3
:
[TRACK] + "Activate"/"Deactivate" + [ENTER]