Seiwa SW701i SW701e - Manual (Page 16)

18 User Manual
♦
Numeric/letter key or moves cursor top right corner
♦
Numeric/letter key or moves cursor left
♦
Numeric/letter key or centers the map at the current cursor po-
sition. If Navigate (Home) mode is set the map is already cen-
tered on the map display
♦
Numeric/letter key or moves cursor right
♦
Numeric/letter key or moves cursor bottom left corner
♦
Numeric/letter key or moves cursor bottom
♦
Numeric/letter key or moves cursor bottom right corner
♦
Numeric key
♦
selects the preferred screen configuration
♦
opens the main Menu
♦
when in chart and data page, keep it pressed for 3 seconds to
customize data fields of the text area
♦
selects the Goto function
♦
inserts l'Event on the ship's position
♦
long press inserts the MOB (Man OverBoard); long press when
the MOB is already present deletes it.
♦
places EBL and VRM
♦
selects the Track menu
♦
exits from menu or leaves a menu without making changes
♦
if you are not into a menu, sets the Navigate (Home) mode: the
cursor is centered on ship's position
♦
confirms selection
♦
places Marks, Waypoints, and selects EBL/VRM, R/B, Info, Find
♦
shows more details of a smaller area
♦
shows a wider, less detailed area
♦
selects the Info function
1.1.5 Software Keys 1
The software keys (soft keys) have different functions according to the modes of
operation: their labels for the current functions, located on the front panel, are
shown on the screen right above the keys. Also they are used from the chart
screen or from the data pages to select one of the data pages available to allow
faster access to the page selection.
When the chart page is selected, the soft key labels are not shown. By pressing
one of the four soft keys their labels for the current functions are shown on the
screen immediately above the soft keys. When the soft key labels are shown, by