Seiwa SW701i SW701e - Manual (Page 45)

47 User Manual
2.9 ALARMS
The chart plotter provides alarms for various functions. You can enter the desired
alarm range for each function.
Auto Off
To set the automatic shutdown of the alarms when the alarm condition disappears.
[MENU] + "Alarms" + [ENTER] + "Auto Off" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "Auto Off" + [ENTER]
Arrival Alarm
To set an acoustic alarm to sound when the vessel is approaching the destination.
[MENU] + "Alarms" + [ENTER] + "Arrival Alarm" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "Arrival Alarm" + [ENTER]
XTE Alarm
To set an acoustic alarm to sound when the vessel is deviating from a defined
course.
[MENU] + "Alarms" + [ENTER] + "XTE Alarm" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "XTE Alarm" + [ENTER]
Anchor Alarm
To set an alarm to sound when the ship moves off the current ship's position
location.
[MENU] + "Alarms" + [ENTER] + "Anchor Alarm" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "Anchor Alarm" + [ENTER]
NOTE By the time the Anchor Alarm is set the current ship's position is saved as
origin position. The alarm goes off when the ship moves away from the origin
position more than the entered alarm range.
Depth Alarm
This function is used to set an acoustic alarm automatically triggered when the
depth value read by the depth transducer is too shallow.
[MENU] + "Alarms" + [ENTER] + "Depth Alarm" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "Depth Alarm" + [ENTER]
HDOP Alarm
This function is used to show a warning when the received HDOP value exceeds
the Alarm Limit for more than 2 seconds. The default setting is 4 seconds.To
activate the HDOP Alarm:
[MENU] + "Alarms" + [ENTER] + "HDOP Alarm" + [ENTER]
SW1101:
[DATA] + "Alarms" + [ENTER] + "HDOP Alarm" + [ENTER]
Heading Alarm
This function is used to show a warning when the HDG sentence is not received
from a magnetic sensor reading.
[MENU] + "Alarms" + [ENTER] + "Heading Alarm" + [ENTER]