Technical specifications, Ff module – Seiwa SW701i SW701e User Manual
Page 106

108
User Manual
♦
5000 Track Points
♦
Create, Move, Insert, Edit, Delete, Send, Receive Waypoint
♦
Create, Move, Edit, Delete, Send, Receive Mark/Event
♦
Navigation to Goto
♦
Create, Save, Name, Edit, Delete, Send, Receive or Follow a Route
♦
Route Data Report and User Points (Marks/Waypoints) List pages
♦
Display vessel's position, direction and Track
♦
Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,
Depth Alarm, HDOP Alarm, Heading Alarm, Grounding Alarm)
♦
Man OverBoard (MOB) to navigate back to a missing person or object
♦
C-Link and C-Weather Service
♦
R-B function
♦
Simulation Mode with cursor control
♦
Internal Fish Finder
TECHNICAL SPECIFICATIONS
♦
Operating Voltage
: 10 - 35 Volt dc
♦
Power consumption
: 12W average; 24W peak (with FF on)
♦
Interface
: NMEA-0183
♦
Autopilot Interface
: NMEA-0180, NMEA-0180/CDX, NMEA-
0183
♦
Display
: Sun Light Viewable Color LCD
(active area 5")
♦
Display Resolution
: 240 x 320 pixels
♦
MEDIA
: SD Card
♦
Cartography
: C-MAP B
Y
J
EPPESEN
DATA MEDIA
♦
Operating temperature range : 32/131 °F (0/+55 °C)
♦
Memory
: Non volatile
♦
Keyboard
: Silicon rubber, backlight
♦
Weight
: 700 gr.
(SW501ci)
680 gr.
(SW501ce)
FF MODULE
600W-50-200KHZ
TECHNICAL SPECIFICATIONS
♦
Power Output
: 600W (4800Wpp), 50/200KHz Dual Frequency
♦
Max Depth
: 213m (700Ft) at 200kHz, 457m(1500Ft) at 50kHz
♦
Automatic Recognition of the AIRMAR "X-DUCER ID" transducers for best
performance
♦
Advanced Digital Signal Processing
♦
Speed & Temperature Sensor (if available on transducer)
♦
Alarms (shallow water, depth, Fish, temp)
♦
Trip Log, Fish Symbols
♦
STC, Interference Rejection, Automatic noise reduction
♦
A-scope, White Line, Zoom x2/x4
♦
Auto range/gain/frequency/shift/ping rate
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
Quick Disconnect Bracket
♦
Chart plotter's protective cover
♦
Fuse 3 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit (O
PTIONAL
) +
Cutting template
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
(SW501ce)