Seiwa SW701i SW701e - Manual (Page 23)

25 User Manual
1.8 USING C-MAP B
Y
J
EPPESEN
DATA MEDIA
The chart plotter has a built-in world map. To use the chart plotter as a navigation
aid, DATA MEDIA with detailed information for the area you wish to navigate are
required. See the technical details of your chart plotter for inserting/removing DATA
MEDIA procedure.
NOTE During normal operations the DATA MEDIA should not be removed since the
chart plotter may lock up.
1.9 SIMULATION MODE
The built-in Simulator function allows you to become proficient in the use of the
chart plotter. It simulates the reception of the navigation data (Lat/Lon, Course,
Speed, date, time). The simulated ship's position is placed at the current cursor
position by the time the simulation is activated. To start the Simulator:
Place the cursor at your desired position + [MENU] + "Advanced Options" +
[ENTER'] + "Simulation Mode" + [ENTER] + "Simulation Mode" + [ENTER]
+ "On" + [ENTER]
You might insert the Speed, Heading, date and time values:
[MENU] + "Advanced Options" + [ENTER'] + "Simulation Mode" + [ENTER]
+ "Speed"/"Heading"/"Date"/"Time" + [ENTER] + enter values + [ENTER]
To select the Cursor Control in Chart page use the cursor up/down to adjust the
Speed and the cursor left/right to adjust the Course:
[MENU] + "Advanced Options" + [ENTER'] + "Simulation Mode" + [ENTER]
+ "Cursor Control" + [ENTER] + "On" + [ENTER]
1.10 CONTROLLING THE DISPLAY
This paragraph describes how to change the display mode and how to move
around the chart by changing the chart scale.
Changing Display Mode
[PAGE]
MARLIN:
[DATA]
EXPLORER 3 :
[MENU] + "Page" + [ENTER]
An icons 1 menu appears on the screen: it shows the available pages.
NOTE 1 N
OT
A
VAILABLE
F
OR Explorer 3 . An items menu is shown in place of the icons menu.
Fig. 1.10 - Example of Page selection menu on SW1101
Move the cursor to select the page you want and the press [ENTER]: the selected
page (or another icons menu 1 ) appears.