Seiwa SW701i SW701e - Manual (Page 55)

57 User Manual
3.3 OTHER MAP CONFIGURATIONS
[MENU] + "Map Options" + [ENTER] + "Other Map Configurations" + [ENTER]
Allows the user to customize the following selections and is divided into: Marine
Settings, Depth Settings, Land Settings, Chart Settings and Underwater Settings.
Display Mode
[MENU] + "Map Options" + [ENTER] + "Other Map Configurations" + [ENTER]
+ "Display Mode" + [ENTER]
Selects from a predefined table what cartographic objects are displayed and which
display options are set. Pre-programmed settings are user selectable from Full,
Medium, Low, Radar, Tides, Custom. The table below shows the selections for
each mode:
Setting Full Medium Low Radar Tides Custom
(Default values)
Place Names On On On On On On
Name Tags On Off Off Off Off Off
Nav Aids & Light Sectors On No Sector No Sector No Sector Off On
Attention Areas On On Off Off Off On
Tides & Currents On Off Off Off On On
Seabed Type On Off Off Off Off On
Ports & Services On On Off On Off On
Tracks & Routes On Off Off Off Off On
Depth Range Min 0 Mt 0 Mt 0 Mt 0 Mt 0 Mt 0 Mt
Depth Range Max 9999 Mt 9999 Mt 9999 Mt 9999 Mt 9999 Mt 10 Mt
Land Elevations On On Off Off Off On
Land Elevation Values On Off Off Off Off On
Roads On Off Off Off Off On
POI On Off Off Off Off On
Lat/Lon Grid On Off Off Off Off On
Chart Boundaries On Auto Off Off Off Off
Value-Added Data On Off Off Off Off On
Chart Lock On On On On On On
Underwater Objects Limit 304 Mt 10 Mt 10 Mt 10 Mt 10 Mt 10 Mt
Rocks Icon+Depth Icon Icon Icon Icon Icon
Obstructions Icon+Depth Icon Icon Icon Icon Icon
Diffusers Icon+Depth Icon Icon Icon Icon Icon
Wrecks Icon+Depth Icon Icon Icon Icon Icon
Marine Settings
To control the display on the map of the marine features.
Place Names : Sets On/Off the displaying of the Names (local area names).
Name Tags : Sets On/Off the displaying of a tag for particular chart objects that either includes the Name
of the chart object or the Depth of an Underwater chart object. Available for Buoys, Towers,
Beacons and Port Marinas.
Nav-Aids & Light Sectors: Sets On/Off/No Sector the graphical presentation of Lights, Signals, Buoys and Beacons.
If No Sector is selected Nav-Aids are shown, Light Sectors are hidden
Attention Areas : Sets On/Off the displaying of Attention Areas (areas in which special attention by the
mariner is required, because of natural or man-made hazards, or sailing regulations and
restrictions. Moreover a special symbol (!) is placed inside the area selecting On option.
This is valid also for the categories: FISHING FACILITY, MARINE FARM/CULTURE,
MILITARY PRACTICE AREA, RESTRICTED AREA, SEAPLANE LANDING AREA. When
the area is small, it is identified only by the boundary).
Tides & Currents : Sets On/Off the displaying of the Tides and Currents. When data/time is available, Tidal
stream arrows are shown on the charts, indicating the direction and strength of the Tide.
If no data/time is available from the GPS or the chart plotter is not in Simulation mode,
the icon on the map is generic one. The color of the arrow denotes the strength of the
current as follows: