Technical specifications, Inserting/removing procedure, Inserting the media – Seiwa SW701i SW701e User Manual
Page 112
114
User Manual
♦
10000 Track Points
♦
Create, Move, Insert, Edit, Delete, Send, Receive Waypoint
♦
Create, Move, Edit, Delete, Send, Receive Mark/Event
♦
Navigation to Goto
♦
Create, Save, Name, Edit, Delete, Send, Receive or Follow a Route
♦
Route Data Report and User Points (Marks/Waypoints) List pages
♦
Display vessel's position, direction and Track
♦
Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,
Depth Alarm, HDOP Alarm, Heading Alarm, Grounding Alarm, External
Alarm)
♦
Man OverBoard (MOB) to navigate back to a missing person or object
♦
C-Link and C-Weather Service
♦
R-B function
♦
Simulation Mode with cursor control
♦
Video Input option
NOTE
1
If Fish Finder/Radar/Video Camera connected.
TECHNICAL SPECIFICATIONS
♦
Operating Voltage
: 10 - 35 Volt dc
♦
Power consumption
: 10W average; 12W max
(the power consump-
tion is measured with VCAM connected and active)
♦
Interface
: NMEA-0183
♦
Autopilot Interface
: NMEA-0180, NMEA-0180/CDX, NMEA-0183
♦
Video Input
: PAL or NTSC video signals automatically
selected
♦
Display
: Color Sunlight Viewable LCD
(active area 7")
♦
Display Resolution
: 800 x 480 pixels
♦
MEDIA
: SD Card
♦
Cartography
: C-MAP B
Y
J
EPPESEN
DATA MEDIA
♦
Operating temperature range : 0/+55°C (32/+131°F)
♦
Memory
: Non volatile
♦
Keyboard
: Silicon rubber, backlight
♦
Weight
: 1150 gr.
(SW701i)
1100 gr.
(SW701e)
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
Quick Disconnect Bracket
♦
AUX IN I/O cable 1,5 mt/5.9 feet
♦
Video Input cable
♦
Chart plotter's protective cover
♦
Fuse 3.15 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit (O
PTIONAL
) + cutting template
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
(SW701e)
INSERTING/REMOVING PROCEDURE
Inserting the MEDIA
Open the door. Hold the MEDIA by the short side. Gently push the MEDIA into the
slot; press the MEDIA in as far as it will go to hold fixed into the slot.