Seiwa SW701i SW701e - Manual (Page 37)

39 User Manual
Clearing Track
All the Track or part of it can be cleared from the screen:
[MENU] + "Track" + [ENTER] + "Delete" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Delete" + [ENTER]
MARLIN/SEAWAVE 3 :
[TRACK] + "Delete" + [ENTER]
[Begin] 1 , [End] 1 and [Whole] 1 allow to identify the start or the end point of the
segment to delete.
NOTE 1 F
OR SEAWAVE 3 , press [1, Begin], [2, End] and [3, Whole].
Selecting Track Number
The chart plotter has the capability to store up to 5 Tracks. To select a Track:
[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Active Track" +
[ENTER] + use the cursor key to select the number + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Config" + [ENTER] + "Active Track" +
[ENTER] + use the cursor key to select the number + [ENTER]
MARLIN/SEAWAVE 3 :
[TRACK] + "Config" + [ENTER] + "Active Track" + [ENTER] + use the cur-
sor key to select the number + [ENTER]
TRACK TO ROUTE FUNCTION
This function creates a Route from a pre-recorded Track. To select this menu:
[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Track To Route" + [ENTER]
MARLIN/SEAWAVE 3 :
[TRACK] + "Track To Route" + [ENTER]
A new window appears on the screen with the following options.
Track To Route
Executes the function that converts the given Track into a Route.
[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Track To
Route" + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Track To
Route" + [ENTER]
MARLIN/SEAWAVE 3 :
[TRACK] + "Track To Route" + [ENTER] + "Track To Route" + [ENTER]
Select Track Number
Selects the Track input number:
[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select Track
No." + [ENTER]
SW1101:
[DATA] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select Track
No." + [ENTER]
MARLIN/SEAWAVE 3 :
[TRACK] + "Track To Route" + [ENTER] + "Select Track No." + [ENTER]