Seiwa SW701i SW701e - Manual (Page 32)

34 User Manual
SW1101:
[DATA] + "Route" + [ENTER] + "Select" + [ENTER] + use the cursor key to
highlight the Route + [Notes]
Another window is shown: use the cursor key to insert the notes (this is possible only
if you have already created a Route). Press [ENTER] to confirm ([Cancel] otherwise).
Hiding or Showing Route
To hide or show the selected Route on the screen:
[MENU] + "Route" + [ENTER] + "Select" + [ENTER] + use the cursor key to
highlight the Route + [Hide] 1 /[Show] 1
NOTE 1 F
OR SEAWAVE 3 , press [3, Hide]/[3, Show].
SW1101:
[DATA] + "Route" + [ENTER] + "Select" + [ENTER] + use the cursor key to
highlight the Route + [Hide]/[Show]
Selecting Route Color
To select Route legs color among the eight available colors:
If in Route menu page:
[MENU] + "Route" + [ENTER] + "Color" + [ENTER] + use the cursor key to
select color + [ENTER]
SW1101:
[DATA] + "Route" + [ENTER] + "Color" + [ENTER] + use the cursor key to
select color + [ENTER]
If in Select Route menu:
[MENU] + "Route" + [ENTER] + "Select" + [ENTER] + use the cursor key to
highlight the Route + [Color] 1 + use the cursor key to select color + [ENTER]
NOTE 1 F
OR SEAWAVE 3 , press [2, Color].
SW1101:
[DATA] + "Route" + [ENTER] + "Select" + [ENTER] + use the cursor key to
highlight the Route + [Color] + use the cursor key to select color + [ENTER]
The Route is drawn on the screen in the selected color. It is possible to select a
different color for any Route.
Deleting Route
If in Route menu:
[MENU] + "Route" + [ENTER] + "Delete" + [ENTER] + [Accept] 1
NOTE 1 F
OR SEAWAVE 3 , press [1, Accept].
SW1101:
[DATA] + "Route" + [ENTER] + "Delete" + [ENTER] + [Accept]
The Route legs and Waypoints are deleted. The Marks linked to the Route are not
deleted. If the destination is placed on the Route, that Route cannot be deleted.
Following a Route (Activate the Navigation)
With the Route shown on the Chart page, move the cursor to the starting Waypoint
in the Route and press [ENTER], select "GOTO" and press [ENTER] again.
MARLIN/SEAWAVE
3 :
move the cursor to the starting Waypoint in the Route and press [GOTO].
The destination is placed on the Waypoint of the selected Route and you are now
navigating to it.