Seiwa SW701i SW701e - Manual (Page 48)

50 User Manual
When a certain type of data (Mark, Events, Route, Track) is saved, a new file is
created on a USER MEDIA. The file contains all points of the selected type cur-
rently stored in the internal memory.
♦
Save Marks : to create a new file containing all Marks stored in the chart
plotter
♦
Save Events: to create a new file containing all Events stored in the chart
plotter
♦
Save Routes: to create a new file containing all Waypoints belonging to the
selected Route (Route number is required)
♦
Save Tracks : to create a new file containing all Track points belonging to
the selected Track (Track number is required)
NOTE When naming a file, you may have trouble finding a name that uniquely identifies
the file's contents. Dates, for example, are often used in filenames; however,
they take up several characters, leaving you with little flexibility. The secret is
to find a compromise, a point where you can combine a date with a word, creating
a unique filename. The maximum length of the filename is 8 characters. The
characters may be numbers (0, ..., 9), letters (A, ..., Z) and spaces (for example
legal identifiers are "ABC", "AA", "12121212", "A B C", "1 A 1", and so on.
Loading File from USER MEDIA
[MENU] + "Save & Load" + [ENTER] + Select the file name in the list +
[Load] 1
NOTE 1 F
OR SEAWAVE 3 , press [2, Load].
SW1101:
[DATA] + "Save & Load" + [ENTER] + Select the file name in the list +
[Load]
The Load function copies the content of the selected file from USER MEDIA to the
internal memory of the chart plotter. If the selected file contains Marks/Events
already present in the chart plotter memory, they are non duplicated. It is re-
quired to insert the number of the Route/Track on which loading data: if the
Route/Track is not empty, it is overwritten.
Deleting File from USER MEDIA
To remove files.
[MENU] + "Save & Load" + [ENTER] + [Delete] 1
NOTE 1 F
OR SEAWAVE 3 , press [3, Delete].
SW1101:
[DATA] + "Save & Load" + [ENTER] + [Delete]
NOTE Remember that this option permanently erases the file.
MARLIN/SEAWAVE 3 :
Selecting Slot
To select the preferred slot where to insert the USER MEDIA. If the User USER
MEDIA is not present in the selected slot, a warning message appears.
[MENU] + "Save & Load" + [ENTER] + [Media] 1 + [Slot] 1
NOTE 1 F
OR SEAWAVE 3 , press [4, SD-card] and [2, Slot].
Reading USER MEDIA directory
To show the list of the files present on the USER MEDIA inserted into the slot:
[MENU] + "Save & Load" + [ENTER] + [Media] 1 + [Read] 1
NOTE 1 F
OR SEAWAVE 3 , press [4, SD-card] and [1, Read].
SW1101:
[DATA] + "Save & Load" + [ENTER] + [Media] + [Read]