Seiwa SW701i SW701e - Manual (Page 136)

138 User Manual
♦
Create, Move, Edit, Delete, Send, Receive Mark/Event
♦
Navigation to Goto
♦
Create, Save, Name, Edit, Delete, Send, Receive or Follow a Route
♦
Route Data Report and User Points (Marks/Events/Waypoints) List pages
♦
Display vessel's position, direction and Track
♦
Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,
Depth Alarm, HDOP Alarm, Heading Alarm, Timer Alarm, Grounding
Alarm, External Alarm)
♦
Man OverBoard (MOB) to navigate back to a missing person or object
♦
C-Link and C-Weather Service
♦
EBL-VRM and A-B functions
♦
Simulation Mode with cursor control
♦
Video Input option
♦
Video Output option
NOTE 1 If Fish Finder/Radar/Video Camera connected.
TECHNICAL SPECIFICATIONS
♦
Power consumption : 3 A max, @ 12 V
♦
Interface : NMEA0183
♦
Autopilot Interface : NMEA-0180, NMEA-0180/CDX, NMEA-
0183
♦
Video Input : PAL or NTSC video signals automati-
cally selected
♦
Video Output : VGA compatible
♦
Display : TFT transmissive LCD
(active area 15")
♦
Display Resolution : 1024 x 768 pixels
♦
MEDIA : C-Card
♦
Cartography : C-MAP B
Y
J
EPPESEN
DATA MEDIA
♦
Operating temperature range : 32/131 °F (0/+55 °C)
♦
Memory : Internal non volatile for user data backup
♦
Keyboard : Silicon rubber, backlight
♦
Weight : 4,5 Kg
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
External bracket and I/O cable 1,5 mt/5.9 feet
♦
AUX IN I/O cable 1,5 mt/5.9 feet (2 pcs)
♦
Video Input cable (2 pcs)
♦
Video Output cable
♦
Chart plotter's protective cover
♦
Fuse 5 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit + cutting template
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
INSERTING/REMOVING PROCEDURE
Inserting the MEDIA
Hold the MEDIA by the short inclined side so that you can see theC-MAP B
Y
J
EPPESEN
label. Open the door, gently push the MEDIA into one of the two slots; push the
MEDIA in as far as it will go, then close the door to hold fixed into the slot.