Technical specifications, Inserting/removing procedure, Inserting the media – Seiwa SW701i SW701e User Manual
Page 100
![background image](/manuals/467964/100/background.png)
102
User Manual
♦
5000 Track Points
♦
Create, Move, Insert, Edit, Delete, Send, Receive Waypoint
♦
Create, Move, Edit, Delete, Send, Receive Mark/Event
♦
Navigation to Goto
♦
Create, Save, Name, Edit, Delete, Send, Receive or Follow a Route
♦
Route Data Report and User Points (Marks/Waypoints) List pages
♦
Display vessel's position, direction and Track
♦
Alarms Handling (Auto Off, Arrival Alarm, XTE Alarm, Anchor Alarm,
Depth Alarm, HDOP Alarm, Heading Alarm, Grounding Alarm)
♦
Man OverBoard (MOB) to navigate back to a missing person or object
♦
C-Link and C-Weather Service
♦
R-B function
♦
Simulation Mode with cursor control
NOTE
1
If Fish Finder connected.
TECHNICAL SPECIFICATIONS
♦
Operating Voltage
: 10 - 35 Volt dc
♦
Power consumption
: 0.6A max @ 12V (7.2W Max)
♦
Interface
: NMEA-0183
♦
Autopilot Interface
: NMEA-0180, NMEA-0180/CDX, NMEA-
0183
♦
Display
: Sun Light Viewable Color LCD
(active area 5")
♦
Display Resolution
: 240 x 320 pixels
♦
MEDIA
: SD Card
♦
Cartography
: C-MAP B
Y
J
EPPESEN
DATA MEDIA
♦
Operating temperature range : 32/131 °F (0/+55 °C)
♦
Memory
: Non volatile
♦
Keyboard
: Silicon rubber, backlight
♦
Weight
: 580 gr.
(SW501i)
560 gr.
(SW501e)
When the package containing the chart plotter is opened for the first time after
purchase, please make sure that the following contents are present (if any item is
missing, please contact your local dealer):
♦
Quick Disconnect Bracket
♦
Chart plotter's protective cover
♦
Fuse 2 Amp. + fuseholder
♦
User Manual
♦
Flush mounting kit (O
PTIONAL
) +
Cutting template
(SW501e)
♦
Smart DGPS WAAS Receiver with cable 15 mt/45 feet
(SW501e)
INSERTING/REMOVING PROCEDURE
Inserting the MEDIA
Open the door. Hold the MEDIA by the short side. Gently push the MEDIA into the
slot; press the MEDIA in as far as it will go to hold fixed into the slot.