Seiwa SW701i SW701e - Manual (Page 51)

53 User Manual
3. User Setting Up
3.1 GENERAL OPTIONS MENU
To set the general settings:
[MENU] + "General Options" + [ENTER]
The possible selections are listed in the table below:
Language : Selects the language for screen labels, menus and options; the map information remain on
the language as in the official paper charts .
Chart Language : Selects a sub-menu with two items: Language to set the language to display chart
information and Mode to define how objects are translated.
Distance Units : Selects the unit for Distance among Nm, Sm, Km.
Speed Units : Selects the unit for Speed among Kts, Mph, Kph.
Wind Units : Selects the unit for Wind among Kts, Kph, Mph, m/s, Bft.
Depth Units : Selects the unit among Ft, FM and Mt.
Altitude Units : Selects the unit among Ft, FL and Mt.
Temperature Units : Selects the unit among °C and °F.
Time Reference : Allows switching between UTC or local time, by entering the Local Time offset.
Daylight Saving Time : Sets On/Off the Daylight Saving Time.
Time Format : Selects the format for the time between 12 and 24 hours.
Date Format : Selects the Date Format between MM-DD-YY (month-day-year) and DD-MM-YY (day-
month-year).
Nav-Aids Presentation : Allows to set the Nav Aids presentation as US (Draw Nav-Aids using NOAA symbology) or
INTERNATIONAL (Draws Nav-Aids using international symbology). When selected it
affects Lights, Signals, Buoys & Beacons display.
Keypad Beep : Enables or disables the single audio beeps emitted any time the chart plotter keypad is
pressed. If the incorrect key is pressed or the function required cannot be executed, the chart
plotter emits three beeps.
Cursor Speed : Selects the Cursor Speed among Low, Medium or High in Chart page or into menu.
3.2 MAP OPTIONS MENU
Zoom Type
[MENU] + "Map Options" + [ENTER] + "Zoom Type" + [ENTER]
Allows larger expansion or compression of the chart scale while zooming in or out.
Zoom Type has two options; Standard (default) or Flexi-Zoom. When in Flexi-
Zoom mode, a short [ZOOM...] push causes a change of chart, whilst a long
[ZOOM...] push (press and hold) causes a pop-up window to be displayed on a
corner of the screen. The window shows the current Zoom Factor. By pressing
[ZOOM IN]/[ZOOM OUT] the map is expanded or compressed according to the
zoom factor selected. The Window is automatically closed if [ZOOM...] is not
pressed for 2 seconds and the selected zoom factor will be used at the next zoom
in/out.
Fonts & Symbols
[MENU] + "Map Options" + [ENTER] + "Fonts & Symbols" + [ENTER]
It is possible to set the size of all names and symbols drawn on the charts,
selecting between Normal size (the regular characters size) and Large size.