Festo Кабели и принадлежности - Manual (Page 7)

Contents and general instructions
V
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
Designated use
The field bus module type SPC200−COM−DN2 enables the
SPC200 to be coupled as a slave to the DeviceNet field bus.
Maximum one field bus module may be installed on the
SPC200.
This manual contains information on installing, commissionĆ
ing and diagnosing the DeviceNet field bus.
Basic components and modules for the SPC200 are described
in the system manual type P.BE−SPC200−... The safety instrucĆ
tions specified in the manuals must always be observed and
the relevant components and modules must only be used as
intended. Please observe also the safety instructions in the
operating instructions for the components used.
The SPC200 and the modules and cables to be connected are
only to be used as follows:
ć in accordance with designated use
ć only in industrial applications
ć without any modifications by the user. Only the converĆ
sions or modifications described in the documentation
supplied with the product are permitted.
ć in faultless technical condition.
When used together with commercially available compoĆ
nents, such as sensors and actuators, the specified limits for
pressures, temperatures, electrical data, torques etc. must be
observed. National and local safety regulations must also be
observed.