Connection instructions for the scanner – Festo Кабели и принадлежности User Manual
Page 36
3. Installation
3−8
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
Connection instructions for the scanner
Please note
You must check the pin assignment of your scanner with
the relevant documentation.
The following diagram shows the connection circuitry for the
SLC scanner and for SF 60 valve terminals (integrated SLC
scanner):
SLC scanner pin assignment
SPC200 with field bus module for DeviceNet
SLC scanner from Allen−Bradley
+24 V bus
(red)
Data +
(white)
Screening/shield (blank)
Data −
(blue)
GND bus
(black)
GND bus
(black)
Data −
(blue)
Screening/shield (blank)
Data +
(white)
+24 V bus
(red)
SF 60 from Festo with integrated SLC scanner
Pin 3
GND bus
Pin 5
Data −
Pin 1
Screening/shield
Pin 4
Data +
Pin 2
+24 V bus
GND bus
(black)
Data −
(blue)
Screening/shield (blank)
Data +
(white)
+24 V bus
(red)
Fig. 3/3:
Pin assignment of scanner