Festo Кабели и принадлежности - Manual (Page 19)

1. System summary
1−7
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
1.5 I/O address ranges and assignments (mapping)
The following table shows the address assignment in the
SPC200 when a field bus module is used:
Module Max. address range
− 1) I0.0 ... I0.9 1) Q0.0 ... Q0.7 1)
I/O module on the first axis
interface string I1.0 ... I1.15 Q1.0 ... Q1.15
First I/O module I2.0 ... I2.9 Q2.0 ... Q2.7
I/O module on the second
axis interface string I3.0 ... I3.15 Q3.0 ... Q3.15
Second I/O module I4.0 ... I4.9 Q4.0 ... Q4.7
Third I/O module I5.0 ... I5.9 Q5.0 ... Q5.7
Field bus module I10.0 ... I13.15 Q10.0 ... Q13.15
1) Address range is not available if a field bus module is used
If a field bus module is used, maximum 3 I/O modules may
be inserted. These provide only freely programmable I/Os in
the operating mode Start/Stop.