Festo Кабели и принадлежности - Manual (Page 57)

4. Commissioning
4−19
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
Assign the I/O addresses of the slave
With the registers Output" and Input" you can assign the
I/O addresses of the SPC200 to the I/O bytes in the scanner.
1
Optional:
4 I−bytes of
diagnostic
information
1
1
Fig. 4/9: Address assignment (example with diagnostic bytes)
Load the configuration into the scanner
Finally, load the configuration data into the scanner.
Further information can be found in the documentation for
the scanner.