Festo Кабели и принадлежности - Manual (Page 42)

4. Commissioning
4−4
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
4.1 Configuring the SPC200
4.1.1 Configuring the hardware of the SPC200 with WinPISA
1. Configure the hardware you are using with WinPISA.
2. Commission the individual axes with the aid of WinPISA
(without using the field bus interface).
Read first the WinPISA manual.
Note the supplementary instructions in this section 4.1.1.