Festo Кабели и принадлежности - Manual (Page 37)

3. Installation
3−9
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
Fitting a terminating resistor
If the SPC200 is at the end of the field bus, a terminating
resistor must be fitted.
If you use T−adapters, we recommend that you install the
terminating resistor at the unused output of the T−adapter.
1
1
Terminating resistor 120 ġ, 0.25 W
Fig. 3/4: Terminating resistor at the end of the field bus
cable