Festo Кабели и принадлежности - Manual (Page 54)

4. Commissioning
4−16
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
4.2.3 Instructions on RSNetWorx for DeviceNet
Insert the slave in the project/network
RSNetWorx for DeviceNet contains an EDS Wizard which will
support you in installing the EDS file. When the EDS file has
been installed, the SPC200 is included in the Hardware" list.
By means of drag and drop, you can insert slaves in the netĆ
work on the right−hand side.
1
1
SPC200 in Hardware" list
Fig. 4/6: Hardware list and network in RSNetWorx for DeviceNet