Festo Кабели и принадлежности - Manual (Page 48)

4. Commissioning
4−10
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
2. Click on a location (here 1āā) and select the module type 2āā.
With the field
bus module Select in 2 with the WinPISA version
SPC200−COM−DN2 WinPISA V 4.5: Field bus module DeviceNet2"
SPC200−COM−CAN WinPISA V 4.1: Field bus module CANBUS"
WinPISA V 4.5: Field bus module CANBUS
(DeviceNet)"
3. Select the register card Field bus".
Fig. 4/4: Field bus configuration
4. Set a protocol variant under [Protocol]. If you have seĆ
lected the module type Field bus module DeviceNet2",
DeviceNet IO" and DeviceNet Profile" will be available
(see section 1.4).
With field bus module SPC200−COM−CAN setting is not
possible.