Allied Telesis AT-S39 - Manual (Page 69)

AT-S39 User’s Guide
69
Configuring Port Parameters
To configure the parameter settings for a port on the switch, perform the
following procedure:
1. From the Main Menu, type 1 to select Port Menu.
2. From the Port Menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter Ports List ->
3. Enter the number of the port you want to configure and press Return.
To configure a range of ports, enter the first port of the range.
The following prompt is displayed:
Ending Port to Configure [1 to 24] ->
4. To configure only one port, enter the same port number as you
entered in Step 3 and press Return. To configure a range of ports,
enter the last port number in the range. The Port Configuration menu
in Figure 14 is displayed.
Figure 14 Port Configuration Menu
Allied Telesyn Ethernet Switch AT-8024
Login Privilege: Manager
Port Configuration
Configuring Ports 4
0 - Status ............ Forwarding
1 - Negotiation ....... Auto
4 - Flow Control ...... None
5 - Advertise 10FDX ... Yes
6 - Advertise 10HDX ... Yes
7 - Advertise 100FDX .. Yes
8 - Advertise 100HDX .. Yes
M - MDI/MDIX Mode ..... Auto
B - Broadcast Control . No Broadcast Control
S - Save Configuration changes
F - Force Renegotiation
X - Reset Port
R - Return to Previous Menu
Enter your selection?