Allied Telesis AT-S39 - Manual (Page 219)

AT-S39 User’s Guide
219
10. Click the Browse button and specify the location and file to be
downloaded onto the switch.
11. Click on the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
12. Click Send.
The software immediately begins to download onto the switch.
The Xmodem File Send window in Figure 63 displays current
status of the software download. The download process takes a
couple minutes to complete.
Figure 63 XModem File Send Window
If you are installing a new management image, the switch begins
to initialize the software after it is installed, a process that takes
approximately one minute to complete. Once the management
software is initialized, the switch automatically resets.
Note
Do not interrupt the initialization process. Do not reboot the switch.