Allied Telesis AT-S39 - Manual (Page 290)

Section III: Web Browser Management
290
Viewing the MAC Address Table
To view the MAC address table, perform the following procedure:
1. From the Home page, select either Configuration or Monitoring.
2. Select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address menu is displayed. Figure 93 shows how this
menu appears when you display it through the Configuration
main menu selection. If displayed through the Monitoring main
menu selection, the Add button is not included. This button is
used to add static and multicast address to the switch. For
instructions on how to add static and multicast MAC addresses,
refer to the next procedure.)
Figure 93 Forwarding Database Tab
The options for displaying MAC addresses are described below.
View All MAC Addresses
This option displays both static and dynamic MAC addresses.
View All Dynamic Addresses
This option displays only dynamic MAC address. Dynamic MAC
addresses are addresses that the switch has learned by examining
the source addresses of frames received on the ports.