Allied Telesis AT-S39 - Manual (Page 242)

Section III: Web Browser Management
242
Pinging a Remote System
You can instruct the switch to ping a node on your network. This
procedure is useful in determining whether a valid link exists between
the switch and another device.
To ping a network device, perform the following procedure:
1. From the Home Page, select Monitoring.
2. From the Monitoring menu, select the System menu option.
3. Select the Ping Client tab.
The menu in Figure 70 is displayed.
Figure 70 Ping Client Menu
4. Enter the IP address of the end node you want the switch to ping.
5. Click OK.
The results of the ping are displayed in a new window.
6. To stop the pinging, click OK.