Allied Telesis AT-S39 - Manual (Page 158)

Section II: Local and Telnet Management
158
Activating or Deactivating the Multiple VLAN Mode
The following procedure explains how to enable or disable multiple
VLANs mode on an AT-8000 Series Switch.
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 3 to select VLANs Mode. Current status for
this functionality (enabled or disabled) is displayed next to this
feature selection. The following prompt is displayed:
Enter VLAN Mode (U-UserConfig, M-Multiple, Q-802.1Q
Multiple VLANs) ->
3. Type M to enable Non-802.1Q compliant multiple VLANs , Q to enable
Q-802.1Q Multiple VLANs, or U to create your own port-based and
tagged VLANs. The following prompt is displayed:
Enter Uplink VLAN Port number -> [1 to 26] ->
4. Enter the Uplink VLAN port number. The following confirmation is
displayed:
SUCCESS - VLAN Mode set to Multiple VLANs mode
Note
For additional information on Multiple VLAN mode, refer to
Multiple VLAN Mode Overview on page 132.