Allied Telesis AT-S39 - Manual (Page 171)

AT-S39 User’s Guide
171
Adding Static and Multicast MAC Addresses
This section contains the procedure for adding static and multicast
addresses to the switch. You can assign up to 255 static MAC addresses
per port on an AT-8000 Series switch.
To add a static or multicast address to the MAC address table, perform
the following procedure:
1. From the Main Menu, type 6 to select MAC Address Tables.
2. From the MAC Address Tables menu, type 2 to select Add Static MAC
Address.
The following prompt is displayed:
Please enter a MAC address ->
3. Enter the static MAC address in the following format:
XXXXXX XXXXXX
Once you have specified the MAC address, the following prompt
is displayed:
Please enter a port number: [1 to 24] ->
4. Enter the number of the port on the switch to which you want to
assign the address.
The management software adds the address to the MAC address
table.
5. Repeat steps 2 to 4 to enter additional static or multicast MAC
addresses.