Allied Telesis AT-S39 - Manual (Page 293)

AT-S39 User’s Guide
293
Adding Static and Multicast MAC Addresses
This section contains the procedure for assigning static or multicast
address to ports on the switch. You can assign up to 255 static MAC
addresses per port.
To add a static or multicast address to the MAC address table, perform
the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 2.
3. From the Layer 2 page, select the MAC Address tab.
The MAC Address menu in Figure 93 on page 290 is displayed.
4. Click Add.
The menu in Figure 94 is displayed.
Figure 94 Add Static MAC Address Menu
5. In the MAC Address section of the menu, enter the new static or
multicast MAC address.
6. In the graphical image of the switch click the port to which you want
to assign the address. A selected port turns white. You can select only
one port.
7. Click Apply.
8. Repeat this procedure to add other static or multicast addresses to
the switch.