Allied Telesis AT-S39 - Manual (Page 63)

AT-S39 User’s Guide
63
Selecting a Switch in an Enhanced Stack
The first thing that you should do before performing any procedure on a
switch in an enhanced stack is check to be sure that you are performing
it on the correct switch. If you assigned system names to your switches,
this should be easy. The name of the switch being managed is always
displayed at the top of every management menu.
When you start a management session on the Master switch of a subnet,
you are by default addressing that particular switch. The management
tasks that you perform effect only the master switch.
To manage a slave switch or another Master switch in the subnet, you
need to select it from the management software.
To select a switch to manage in an enhanced stack, perform the
following procedure:
1. From the Main Menu, type 9 to select Enhanced Stacking.
2. From the Enhanced Stacking menu, type 2 to select Stacking Services.
The menu in Figure 11 is displayed.
Figure 11 Stacking Services Menu
Allied Telesyn Ethernet Switch AT-8024GB
Sales Switch
Login Privilege: Manager
Stacking Services
Switch Software Switch
Num MAC Address Name Mode Version Model
-------------------------------------------------------------
G - Get/Refresh List of Switches
S - Sort Switches in New Order
A - Access Switch
I - Image Download to Remote Switches
C - Config Download to Remote Switches
B - Boot Loader Download to Remote Switches
R - Return to Previous Menu
Enter your selection?