Allied Telesis AT-S39 - Manual (Page 218)

Section II: Local and Telnet Management
218
6. To download a file using Xmodem, type X at the prompt displayed in
Step 4.
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
Note:Please select 1K Xmodem protocol for faster
download.
7. Type Y for Yes.
The prompt “Downloading” is displayed.
8. Begin the file transfer of the new management software image.
Note
The transfer protocol must be Xmodem or 1K Xmodem.
Steps 9 through 12 illustrate how you would download a file using
the Hilgraeve HyperTerminal program.
9. From the HyperTerminal main window, select the Transfer menu.
Then select Send File from the pull-down menu, as shown in Figure
61.
Figure 61 Local Management Window
The Send File window in Figure 62 is displayed.
Figure 62 Send File Window