Allied Telesis AT-S39 - Manual (Page 204)

Section II: Local and Telnet Management
204
Configuring Port Access Control Parameters
To configure port access control parameters, perform the following
procedure:
1. From the main menu, type 1 to select the Port menu.
2. In the Port menu, type 6 to select the Port Access Control menu.
3. In the Port Access Control Menu, type 3 to select Configure Port
Access Parameters. The following prompt is displayed:
Enter ports list ->
4. Enter the port or the range of ports that you want to configure. Press
Return. The following menu is displayed.
Figure 55 Configuring Port Access
5. Type 0 to select Port Role. The following prompt is displayed:
Enter new port role [N-None,A-Authenticator] ->
6. Type A to select Authenticator. Press Return. Additional Configure
Port Access Parameters are displayed (see Figure 56). Port Access
Parameters are listed as menu items with factory set default ranges.
Allied Telesyn Ethernet Switch AT-8024
Login Privilege: Manager
Configure Port Access Parameters
Configuring Ports 3
0 - Port Role ......... None
S - Save Configuration changes
R - Return to Previous Menu
Enter your selection?