Allied Telesis AT-S39 - Manual (Page 223)

AT-S39 User’s Guide
223
Downloading Files Switch to Switch
The previous procedure explained how to download an AT-S39 software
image or configuration file onto a switch from a local management
session. This procedure explains how to download an AT-S39 software
image or configuration file from one AT-8000 Series switch to another
switch.
This procedure is useful in networks that contain a large number of AT-
8000 Series switches. Once you have updated the software on the
master switch of an enhanced stack, you can instruct the master switch
to automatically upgrade the other AT-8000 Series switches in the same
subnet.
Note
The following procedure can only be performed from a local
management session.
To download a management software image or configuration file from a
master switch to other switches in the same subnet, perform the
following procedure:
1. From the Main Menu, type 9 to select Enhanced Stacking.
The Enhanced Stacking window in Figure 10 on page 61 is
displayed.
2. From the Enhanced Stacking window, type 2 to select Stacking
Services.
Note
The “2 - Stacking Services” selection is available only on master
switches.
The window in Figure 11 on page 63 is displayed.
3. Do one of the following:
❑ To download both the AT-S39 software image and bootloader on
the master switch to another AT-8000 Series switch, type I to
select Image Download to Remote Switches.
❑ To download the configuration file on the master switch to
another AT-8000 Series switch, type C to select Config Download
to Remote Switches.
❑ To download just the bootloader on the master switch to another
switch, type B to select Bootloader Download to Remote
Switches.