Allied Telesis AT-S39 - Manual (Page 155)

AT-S39 User’s Guide
155
Now let’s assume that you have decided to create a VLAN called NMS
with a VID of 24 for the sole purpose of remote network management.
For this, you would need to create the NMS VLAN on each AT-8000 Series
switch that you want to manage remotely, being sure to assign each
NMS VLAN the VID of 24. Then you would need to be sure that the uplink
and downlink ports connecting the switches together are either tagged
or untagged members of the NMS VLAN. You would also need to specify
the NMS VLAN as the management VLAN on each switch using the
management software. Finally, you must be sure to connect your
management station to a port on a switch that is a tagged or untagged
member of the management VLAN.
To specify the management VLAN in the AT-S39 software, do the
following:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 4 to select Management VLAN.
The following prompt is displayed:
Enter Management VLAN ID [1 to 4094] ->
3. Specify the VID of the VLAN that is to function as the management
VLAN. This VLAN must already exist on the switch.
The following prompt is displayed:
SUCCESS - Press any key to continue ...
4. Press any key.
5. Type S to select Save Configuration Changes.