Allied Telesis AT-S39 - Manual (Page 55)

AT-S39 User’s Guide
55
Configuring the Console Startup Mode
You can configure the AT-S39 software to display either the Main Menu
or the command line interface prompt ($) whenever you start a local
management session. The default is the Main Menu.
To change the console startup mode, perform the following procedure:
1. From the Main Menu, type 5 to select System Config Menu.
2. From the System Configuration Menu, type 6 to select Console
Startup Mode.
The following prompt is displayed:
Enter Console Mode (M-Menu, C-CLI):
3. Type M if you want a local management session to always start with
the Main Menu, or C if you want it to display the command line
interface prompt.
A change to the console startup mode takes effect the next time
you start a local management session.