beautypg.com

Displaying switch statistics – Allied Telesis AT-S39 User Manual

Page 211

background image

AT-S39 User’s Guide

211

Displaying Switch Statistics

To display Ethernet statistics for an entire switch, perform the following
procedure:

1. From the Main Menu, type 7 to select Ethernet Statistics.

2. From the Ethernet Statistics menu, type 2 to select Display Module

Statistics.

The statistics for the port are displayed in the Display Module
Statistics window, shown in Figure 59.

Figure 59 Display Module Statistics Window

The information in this window is for viewing purposes only. The
statistics are defined below:

Total Count
Number of valid packets received and transmitted by the switch.

Transmit Packets
Number of packets transmitted from the switch.

Received Packets
Number of packets received by the switch.

Allied Telesyn Ethernet Switch AT-8024

Login Privilege: Manager

Display Module Statistics

Ethernet statistics for this module

TOTAL_COUNT ................. 0
TX_COUNT .................... 0
RX_COUNT .................... 0
RX_BRDCAST .................. 0
RX_MLTCAST .................. 0
RX_UNICAST .................. 0
RX_OVERFLOW ................. 0
CRC_ERROR ................... 0
UNDERSIZE ................... 0
OVERSIZE .................... 0
FRAGMENT .................... 0
PORT_IN_DISCARDS ............ 0

U - Update Display
C - Clear Module Statistics
R - Return to Previous Menu

Enter your selection?