Allied Telesis AT-WA7500 - Manual (Page 68)

3 - Configuring the Ethernet Network
68
Customizing Subtype Filters
You can configure the access point to pass or drop certain customized
frame subtypes. You define the action, subtype, and value parameters.
Allow/Pass
Check or clear this check box. Check this check box to pass all frames of
the subtype and value. Clear this check box to drop all frames of the
subtype and value.
Subtype
Selects the frame subtype you wish to configure.
Value
The following table describes frame subtypes and their values. The value
must be two hex pairs. When a match is found between frame subtype
and value, the specified action is taken.