Allied Telesis AT-WA7500 - Manual (Page 154)

6 - Configuring Security
154
Changing the Default Login
If you are not using a password server to authorize user logins, you
should change the default user name and password and create a read-
only password.
To set up logins
1. From the Main Menu, select Security then Passwords. The
Passwords screen appears.
2. Uncheck Use RADIUS for Login Authorization.
3. Select Submit Changes.
4. Configure the Password parameters. These parameters are described
below:
Use RADIUS for Login Authorization
Determines if you are using a password server to authenticate
end devices that can communicate with this access point. Clear
this check box.
User Name
Enter the user name you need to use to log in to this access point.
This parameter can be from 0 to 16 characters long.
If you leave the user name and password fields blank, a user will
not need to log in to the access point.