Allied Telesis AT-WA7500 - Manual (Page 155)

AT-WA7500 User’s Guide
155
Password
Enter the password you need to use to log in to this access point.
This password gives you read and write access to the access point
configuration. This parameter can be from 0 to 16 characters long.
If you leave the user name and password fields blank, a user will
not need to log in to the access point.
Read Only Password
Enter the password you need to use to log in to this access point.
This password gives the user read-only access to the access point.
This user is able to view the configuration and execute
diagnostics but cannot perform any tasks that affect the
operation of the access point, such as changing configuration
options, rebooting, or downloading software.
To disable this password, delete it.
Allow Service Password
If the user enters a login that does not match either the user name
and password or the read only password, check this check box to
allow the login to be checked against the service password. Allied
Telesyn Technical Support may use this service password if they
need to troubleshoot this access point.
5. Select Submit Changes to save your changes. To activate your
changes, select Save/Discard Changes from the menu bar then Save
Changes and Reboot. For help, see Saving Configuration Changes
on page 41.
Once the changes are activated, you must enter these new values when
you use a web browser or telnet to connect to this access point.