Allied Telesis AT-WA7500 - Manual (Page 234)

9 - Additional Access Point Features
234
Using Command Console Mode
You can use the Command Console mode to manipulate some access
point files and file segments. You can also use Command Console mode
to upgrade access points using TFTP and script files.
You access the Command Console mode through the serial port using a
communications program or over the network using a telnet session.
You cannot access Command Console mode using a web browser
interface.
Entering
Command
Console Mode
1. Use a communications program or telnet to start a session with the
access point. For help, see Using a Communications Program on
page 35.
2. From the Access Point Configuration menu, choose Maintenance.
3. From the Maintenance menu, choose Command Console. The list of
commands appears.