Using test mode commands – Allied Telesis AT-WA7500 User Manual

Page 227

Text mode
Original mode

AT-WA7500 User’s Guide

227

To display CAM commands

Type any letter or number other than B and press . The

CAM commands appear on the screen.

Using Test Mode

Commands

Within the AP monitor, Test mode lets you perform certain test
functions.

Because the commands can cause undesirable results if not properly
executed, you should contact Allied Telesyn Technical Support for
assistance if you are unsure about the proper procedure to use.

To enter Test mode

1. Type

TEST and press .

2. Enter a password. The default password is

EV98203T (case

sensitive).

When you are in Test mode, the test prompt (test>) appears.