Allied Telesis AT-WA7500 - Manual (Page 240)

9 - Additional Access Point Features
240
localfilename is the name of the file to be sent from the access
point.
Example:
The following command takes file UAP.PRG that is saved in the
active boot drive on the access point client and stores it in the
inactive boot segment on the access point server that has IP
address 1.2.3.4.
TFTP PUT 1.2.3.4 IB:UAP.PRG AB:UAP.PRG
The access point may generate these error messages when it
issues a TFTP PUT command. Other error messages may be
returned from the server and displayed by the access point. See
your server documentation for additional information.
TFTP SERVER LOG
Purpose: The access point can function as a TFTP
server. You can use the TFTP server log
command to save a history of TFTP client
requests. The TFTP server log contains
useful TFTP server status information. The
log begins when you set up the server. To
clear the log, reboot the access point.
Syntax: TFTP SERVER LOG
Error Message Explanation
Can’t read file The requested file may not exist.
Invalid opcode during
put This error should not occur under normal
operating conditions. This error indicates a
TFTP protocol error that will not occur
when you use TFTP servers that conform
to the protocol.